波段选择协同表达高光谱异常探测算法

高光谱遥感影像具有光谱分辨率极高的特点,承载了大量可区分不同类型地物的诊断性光谱信息以及区分亚类相似地物之间细微差别的光谱信息,在目标探测领域具有独特的优势。与此同时,高光谱遥感影像也带来了数据维数高、邻近波段之间存在大量冗余信息的问题,高维度的数据结构往往使得高光谱影像异常目标类和背景类之间的可分性降低。为了缓解上述问题,本文提出了一种基于波段选择的协同表达高光谱异常探测算法。首先,使用最优聚类框架对高光谱波段进行选择,获得一组波段子集来表示原有的全部波段,使得高光谱影像异常目标类与背景类之间的可分性增强。然后使用协同表达对影像上的像元进行重建,由于异常目标类和背景类之间的可分性增强,对异常目标像元进行协同表达时将会得到更大的残差,异常目标像元的输出值增大,可以更好地实现异常目标和背景类的分离。本文使用了3组高光谱影像数据进行异常目标探测实验,实验结果表明,该方法与其他现有高光谱异常目标探测算法对比,曲线下面积AUC(Area Under Curve)值更高,可以更好地实现异常目标与背景分离,能够更有效地对高光谱影像进行异常目标探测。     

顾及地形起伏的无人机影像覆盖分析方法

使用无人机实施测绘航空摄影时，由于无人机相对航高较低，地面起伏会对无人机影像的分辨率、覆盖范围、重叠度造成较大的影响，影像成果会出现分辨率不足、重叠度不够、覆盖漏洞等缺陷。针对这一情况，本文提出了一种利用数字微分正解法的计算方法，借助DEM准确计算每张影像的覆盖范围，并使用FME软件高效生成全部影像的覆盖范围。经过实际使用，验证了该方法可以在航线设计阶段准确预测并分析全部影像的覆盖范围、重叠度，因此可及时发现设计问题并调整航线。该方法可以有效减少因地形起伏造成的影像覆盖缺陷，减少返工现象，从整体上提高了作业效率。     

针对地质灾害隐患点的无人机航摄像控点布点方案

以陕西省某地质灾害隐患点1∶2000航飞生产任务为背景，本文结合垂直起降式无人机航摄技术特点和地质灾害隐患点区域实际情况，通过详细对比几种无人机航摄像控点布控方案的优劣，研究无人机像控点布设方案对空三加密精度的影响，总结了适用于不同地质灾害隐患点的像控点布设方案。通过本文研究，为今后制定地质灾害隐患点的无人机航摄像控点布设方案提供了参考依据。     

AN ILLUSTRATIVE STUDY ON LOCAL LANDSCAPEAND ITS LONG-TERM CHANGES BASED ON IKONOS AND HISTORICAL AERIAL PHOTO

Nowadays, the research works on landscape at fine scales using high-resolution images are uncommon.This research is based on the analysis of the combination of remote sensing data (1KONOS imagery acquired in 2002 and historical aerial photo taken in 1942). In the paper, the ecotopes in Qiujiadou and Xishao villages in Yixing City of Jiangsu Province in 1942 and 2002 were compared and landscape changes as well as the causes of the considerable changes were analyzed. It was found that the ecotope changes were at greater level in some aspects such as water surface and perennial vegetation coverage etc. This study at fine scale is globally significant for the rural areas, especially for the subsistence agricultural land, which occupies larger percentage in the earth. And it analyzes the structure of landscape based on a new landscape classification system--stratifications method.     

Three dimensional simulation of fluid flow in X‐ray CT images of porous media

A numerical scheme is developed in order to simulate fluid flow in three dimensional (3‐D) microstructures. The governing equations for steady incompressible flow are solved using the semi‐implicit method for pressure‐linked equations (SIMPLE) finite difference scheme within a non‐staggered grid system that represents the 3‐D microstructure. This system allows solving the governing equations using only one computational cell. The numerical scheme is verified through simulating fluid flow in idealized 3‐D microstructures with known closed form solutions for permeability. The numerical factors affecting the solution in terms of convergence and accuracy are also discussed. These factors include the resolution of the analysed microstructure and the truncation criterion. Fluid flow in 2‐D X‐ray computed tomography (CT) images of real porous media microstructure is also simulated using this numerical model. These real microstructures include field cores of asphalt mixes, laboratory linear kneading compactor (LKC) specimens, and laboratory Superpave gyratory compactor (SGC) specimens. The numerical results for the permeability of the real microstructures are compared with the results from closed form solutions. Copyright © 2004 John Wiley & Sons, Ltd.     

Wavelet Analysis of Space Solar Telescope Images

The scientific satellite SST (Space Solar Telescope) is an important research project strongly supported by the Chinese Academy of Sciences. Every day, SST acquires 50 GB of data (after processing) but only 10GB can be transmitted to the ground because of limited time of satellite passage and limited channel volume. Therefore, the data must be compressed before transmission. Wavelets analysis is a new technique developed over the last 10 years, with great potential of application. We start with a brief introduction to the essential principles of wavelet analysis, and then describe the main idea of embedded zerotree wavelet coding, used for compressing the SST images. The results show that this coding is adequate for the job.     

SAMPLING REMOTELY SENSED IMAGERY FOR STORAGE,RETRIEVAL, AND RECONSTRUCTION*

A major difficulty in remote sensing is handling the many data from sensors aboard aircraft and satellites. In this paper we identify an optimal procedure for sampling remotely sensed data before their storage or on their retrieval. The procedure depends on spatial correlation in the scene and uses kriging to estimate values that have been lost. An example in which data from an airborne multispectral scanner could be diminished to only about one tenth without serious loss of precision illustrates the method.     

Metamorphism in Archaean greenstone belts: calculated fluid compositions and implications for gold mineralization

An inescapable consequence of the metamorphism of greenstone belt sequences is the release of a large volume of metamorphic fluid of low salinity with chemical characteristics controlled by the mineral assemblages involved in the devolatilization reactions. For mafic and ultramafic sequences, the composition of fluids released at upper greenschist to lower amphibolite facies conditions for the necessary relatively hot geotherm corresponds to those inferred for greenstone gold deposits (X_CO2= 0.2–0.3). This result follows from the calculation of mineral equilibria in the model system CaO–MgO–FeO–Al₂O₃–SiO₂–H₂O–CO₂, using a new, expanded, internally consistent dataset. Greenstone metamorphism cannot have involved much crustal over-thickening, because very shallow levels of greenstone belts are preserved. Such orogeny can be accounted for if compressive deformation of the crust is accompanied by thinning of the mantle lithosphere. In this case, the observed metamorphism, which was contemporaneous with deformation, is of the low-P high-T type. For this type of metamorphism, the metamorphic peak should have occurred earlier at deeper levels in the crust; i.e. the piezothermal array should be of the ‘deeper-earlier’type. However, at shallow crustal levels, the piezothermal array is likely to have been of ‘deeper-later’type, as a consequence of erosion. Thus, while the lower crust reached maximum temperatures, and partially melted to produce the observed granites, mid-crustal levels were releasing fluids prograde into shallow crustal levels that were already retrograde. We propose that these fluids are responsible for the gold mineralization. Thus, the contemporaneity of igneous activity and gold mineralization is a natural consequence of the thermal evolution, and does not mean that the mineralization has to be a consequence of igneous processes. Upward migration of metamorphic fluid, via appropriate structurally controlled pathways, will bring the fluid into contact with mineral assemblages that have equilibrated with a fluid with significantly lower X_CO2. These assemblages are therefore grossly out of equilibrium with the fluid. In the case of infiltrated metabasic rocks, intense carbonation and sulphidation is predicted. If, as seems reasonable, gold is mobilized by the fluid generated by devolatilization, then the combination of processes proposed, most of which are an inevitable consequence of the metamorphism, leads to the formation of greenstone gold deposits predominantly from metamorphic fluids.     

Surface Photometry of Comet Hale-Bopp Carbon Images

A very long series of photographic observations of the comet Hale-Bopp has been made during January–April 1997 at the double astrograph (400/2000) of the Main Astronomical Observatory (Kyiv, Ukraine). Some of the cometary photos were obtained with two wide-band filter combinations. One of these combinations isolates C₂ emission, another — the nearby dust continuum. The images were digitized by means of AMDPH-XY machine and then calibrated following the standard procedure. After subtraction of the dust continuum the distribution of surface brightness in the C₂ emission coma of comet Hale-Bopp was studied. We found an asymmetric brightness distribution both pre- and post-perihelion. On 21.77 April 1997 a secondary brightness peak is found at the distance of 1.03 × 10⁵ km from the nucleus. It is possible that this peak is related to the extended source of the C₂ molecules. This revised version was published online in July 2006 with corrections to the Cover Date.     

Direct mid-IR images of Gl 2591,W51-IRS2 and S140

We present the results of direct mid-IR images of the luminous young stellar objects GL 2591, S140-IRS1, and W51-IRS2. The sources show an extended mid-IR emission at the limit of our spatial resolution indicating the presence of dense circumstellar dust disks.